X-431 EURO TAB III

Wide vehicle model coverage with over 100 models

Including Software Updates

Supports PassThru

Supports Remote Diagnosis

The X-431 EURO TAB III, based on Android 9 system, is the latest addition to our X-431 Series and the newest high-end vehicle diagnostic device that has been developed by LAUNCH.

It passes all technology and diagnostic advantages from the previous X-431 EURO TAB II model, such as wide car model coverage, powerful test function, abundant special functions, accurate test data and more. The new high-end diagnostic device is integrated with a “Guided Diagnosis” function, known as  LAUNCH Electronic Database, powered by HaynesPro, to support your technicians in their daily work.

It comes with SmartLink C as an equipped standard VCI, supported with LAUNCH Super Remote Diagnosis System (SRDS), DoIP, PassThru and the possibility to extend the device with a HD Truck Software, which can be purchased separately.

The scope of delivery includes the new LAUNCH O2-1 ScopeBox to handle the sensor testing, a 13.3 inch HD display sunlight readable screen, a new designed APK Interface for more practical functions and all necessary cables and accessories.

Technical Data

Operating System
Android 9.0

Processor
2.0 GHz / 8 Core

Display
13.3″ 
1.920 x 1.080 mm

RAM
8 GB

Memory
256 GB

Micro SD Card
up to 128 GB

WiFi
2,4 GHz / 5 GHz

USB

Bluetooth

Camera
8 MP Front
16 MP Rear

Battery
9.360 mAh
7.6 V / 71.1 Wh

Dimensions
353 x 236 x 71 mm

Service Functions

Electric Parking Brake

Oil Change Service

Steering Angle Sensor Calibration

Battery Retraining

Brake Bleeding System

Diesel Particle Filter

Injector Coding

Retraining Throttle Valve

Tyre Pressure Monitoring System

Crankshaft Position Sensor

Immobiliser

Adaptive Driving Light

Window Regulator Reset

Sunroof

Chassis Calibration

Exhaust Gas Recirculation

Fuel Mixture Adaption

AdBlue Reset

Coolant Venting

Nitrogen Oxid Sensor Reset

Drivers Seat Memory

Start-Stop Reset

Transport Mode

Tyre Diameter Reset

Transmission Adaptive Value Reset

Menu Language

Gas Particulate Filter Regeneration

Intelligent Cruise Control System

A/C System Relearn

Motor Angle Calibration

Engine Power Balance Monitoring

High Voltage Battery Diagnostic

Immo PROG

ECU Reset

FRM Matching

Rain Light Sensor

Clutch Matching

Turbo Matching

Gateway Module Data Calibration

SmartLinkC

Supports Passenger and Commercial Vehicles

Remote Diagnosis

Compatible with DoIP

PassThru J2534, D-PDU, RP-1210

Local Diagnosis

PassThru

Solution

Almost every modern car is operated via an electronic control module. Allowing data transfer between each other. This can lead to software issues and requires reprogramming of the vehicle control modules through the OBDII port. The regulation provides for the possibility of reprogramming all the vehicle ECUs with PassThru technology.

The standardisation gives workshops the possibility of having just one VCI Box to communicate to the manufacturers software and server to reprogram all the vehicle ECUs.

Cost-effective access to information and ECU programming downloads directly from the vehicle manufacturer portal when required.

The EU requires vehicle manufacturers to allow free companies to update software on vehicles that meet Euro 5 or higher. The procedure is called PassThru, according to the SAE 2534 and/or ISO 22920 standard.

Remote Diagnostic

Solution

Vehicle Remote Diagnostic Solution is the ideal tool for identifying and fixing problems  that may arise during the lifecycle of certain vehicle components and are too hard or complicated to determine without the support of an expert technician.

Just attach the SmartLink C Box to the vehicle and wait for the X-431 EURO TAB III device to identify the problem. 

An expert technician can now access the OBD diagnostic functions remotely with the same level of functionality that a direct physical connection provides. 

LAUNCH Remote Diagnostic Solution will save mechanics a lot of working time and increase their efficiency dramatically by letting experts access vehicle data from a greater distance to identify and solve the problem for local mechanics.

Voluntary

Software Update

Each purchase of a device includes a software update package. After the expiry the user can freely decide if and when the next update should be carried out. This means that the customer can update his diagnostic device to the latest version even after years of use, without any contract and without time limits.

Multibrand Tester

Over 100 Models

Take advantage of a wide vehicle model coverage in one device without having to take additional expansion measures such as downloads etc. Our comprehensive X-431 EURO TAB III diagnostic device covers more than 100 manufacturers from Europe, Asia and America. Check now whether your model is covered:

X-PROG 3
The X-PROG 3 key and immobiliser programmer is a powerful anti-theft solution and an ideal choice for professional repair shops and vehicle maintenance businesses.
X-431 TSGUN
The X-431 TSGUN is a professional TPMS module with integrated sensor activation, reading, programming and teach-in function.
VSP-600 USB Videoscope
The LAUNCH video endoscope is the ideal tool for viewing and capturing video and images in hard-to-reach areas of your vehicle.
BST-360
The LAUNCH BST-360 is a Bluetooth Battery Tester that has an advanced conductance test function that measures the exact cold start current capacity of the vehicle battery to provide meaningful results.
O2-1 ScopeBox
included
Turn your X-431 EURO TAB III into a 4-channel oscilloscope with the help of the LAUNCH O2-1 ScopeBox. The ScopeBox captures faulty / irregular signals for curve analysis on the screen of the X-431 EURO TAB III. This analysis can be used to detect various defects, e.g. in sensors, actuators and circuits.
X-PROG 3
The X-PROG 3 key and immobiliser programmer is a powerful anti-theft solution.
X-431 TSGUN
The X-431 TSGUN is a professional TPMS module with integrated sensor activation, reading, programming and teach-in function.
VSP-600 USB Videoscope
Ideal tool for viewing and capturing video and images in hard-to-reach areas of your vehicle.
BST-360
Bluetooth Battery Tester that has an advanced conductance test function that measures the exact cold start current capacity of the vehicle battery.
02-1 ScopeBox
included
Turn your X-431 EURO TAB III into a 4-channel oscilloscope with the help of the LAUNCH O2-1 ScopeBox.

Automatic

VIN Recognition

Extension Package

For Driver Assistance Systems

The ADAS function (Advanced Driver Assistance System) is an electronic accessory that supports the driver in certain driving situations. The ADAS system does not only increase driving safety but also offers the driver more comfort. More Info

Receive further information or a quote from our distribution partners.

Software Activation

Truck Extension

The X-431 EURO TAB III is equipped to diagnose not only commercial vehicles but also heavy goods vehicles. Just simply extend the software via a truck update card which you can purchase through our authorised distribution partners.

Electronics Package

Inclusive

The LAUNCH CarSET Electronics package is our basic equipment that supports your technicians to identify, locate and correct faults in electrical systems and components errors using intelligent data applications such as our Vehicle Electronics Smart Assistant (VESAâ„¢).

Receive further information or a quote from our distribution partners.