Diagnostic
Accessories
X-PROG 3
The X-PROG 3 key and immobilizer programmer is a powerful anti-theft solution and an ideal choice for professional repair shops and vehicle maintenance businesses. X-PROG 3 is an integrated multi-function module, which offers multiple functions in one device for fast and accurate reading and writing of data. With powerful functions, supporting Mercedes-Benz infrared key reading / writing, BMW engine ISN code reading, engine reading in BENCH mode, etc. X-PROG 3 is flexible, stable, reliable, and suitable for professional users.
Technical Data
Interface
DB26, DB15
Input Voltage
DC 12 V
Input Current
500 mA
Working Temperature
0 - 15 °C
Storage Temperature
- 20 - 70 °C
Dimensions
39 x 107 x 298 mm
Features
Anto-Theft Type
Identification
Remote Control Matching
Key Chip
Read & Write
Anti-Theft Password Reading
Anti-Theft Component Replacement
HD Box 3
The new LAUNCH HD Box 3 is the perfect expansion module for users of the X-431 EURO PRO 4 and X-431 EURO PRO 5. Trucks, buses and commercial vehicles from over 20 manufacturers are covered. Communication is established via Bluetooth or by cable and supports 12 V and 24 V on-board voltage.
Technical Data
Operating Voltage
DC 9 - 36 V
Test Voltage
DC 12 V
Power Input
≤ 3 W
WLAN
USB
Bluetooth
Working Temperature
- 10° C ~ 50° C
Dimensions
264 x 210 x 30 mm
Features
Supports over 20 Manufacturers
Online Update
ABS Control Unit
Service Functions
Time Maintenance
Transmission Reset
Engine Reset
Retardar Reset
Oil Reset
Read AdBlue Status and Consumption
Setting Vehicle Speed Limit
Setting Vehicle Rotational Speed
Fuel Consumption Setting
Non-Standard Connector Pack
Non-standard connector pack allows X-431 LITE version device to diagnose old vehicles with a non OBD II socket, the pack consists of 24 connectors for different vehicle models.
HD Pack
HD Pack for EURO TAB II consists of activation code for HD Software and non-standard HD cables. The Smartbox 3.0 which comes with the X-431 EURO TAB II is compatible with both 12 V and 24 V.
O2-1 ScopeBox
Turn your X-431 EURO TAB II into a 4-channel oscilloscope with the help of the LAUNCH O2-1 ScopeBox. The ScopeBox captures faulty / irregular signals for curve analysis on the screen of the X-431 EURO TAB II. This analysis can be used to detect various defects, e.g. in sensors, actuators and circuits. Gain valuable time in vehicle diagnostics and save costs for unnecessarily replaced components.
Technical Data
Channels
1 GB for 4 Channels
DC Accuracy
DC Gain
± 3 %
Bandwidth
100 MHz
Rise Time
± 3.5 ns (typical)
Sampling Rate
1 GB for 4 Channels
Input Impedance
1 MΩ ± 1.5 %
Memory Depth
50 M for 4 Channels
Vertical Resolution
8 bit
Vertical Scale
5 mV ~ 10 V
Vertical Offset Range
± 2.5 V ± 120 V
Invert
Support
Coupling
DC, AC
Time Base
50 ns ~ 1 ks
Time Base Precision
20 ppm
Features
Automatic Measurement
23 Arten
Powerful Trigger Function
High Memory Depth
Special Quick Memory Function
Virtual
Keyboard
Several System Settings
Waveform Recording
S-2 Sensorbox
The S2-2 Sensor Box is specially designed for the diagnosis and simulation of sensor faults. It mainly contains “Sensor”, ” Actuator”, “Defined / Draw”, “Timing Waveform” and ” Multimeter”. The module cannot be used separately, but must be operated together with LAUNCH-specific diagnostic tools that are compatible with this module.
Technical Data Sensorbox
Channels
2 Channels
Accuracy
± 1 %
Amplitude Range
0 V - 20 V
Max. Current Output
20 mA
Predefined Frequency Range
0 - 20 kHz
Square Wave Signal Frequency Range
0 - 15 kHz
Duty Cycle of the Square Wave Signal
0 - 100 %
Power Supply
Simulator Sensor Output Max. 20 mA
DC Voltage Simulation
supported
Fixed Frequency Simulation
supported
Predefined Wave Simulation
supported
Predefined Frequency Range
supported
Signal Generator Interface
2 Interfaces
External Power Supply
1 Connector
Magnetic Interface
1 Interface
Multimeter Interface
2 Interfaces
Operating Temperature
0°C - 50°C
Storage Temperature
-30°C - 70°C
Predefined Frequency Range
0 - 20 kHz
Predefined Frequency Range
supported
Storage Temperature
-30°C - 70°C
Technical Data Multimeter
DC /VC Voltage
Resistance Test
0 - 40 MΩ
Capacity
0 F - 100 uF
(max. 30 s Measuring Time)
Diodes
0 V - 1.5 V
Continuity Detection
Noises below 30 MΩ
Features
Hand-Drawn Curve Progression on Screen
Sensor Simulation
DC Voltage, Fixed Frequency, Predefined Curve Progression
Integrated Multimeter Test Function
Electric Voltage, Resistance, Frequency
VSP-600 USB
Videoscope
The LAUNCH video endoscope is the ideal tool for viewing and capturing video and images in hard-to-reach areas of your vehicle. Equipped with a 7 mm small and fluid-resistant camera head and adjustable LED illumination.
Technical Data
Diameter
5,5 mm
Sensor Size
1/9"
Temperature
- 10° C - 55° C
Resolution
1.280 x 720
USB
Type C micro USB
Power
5 V
LED
5 Level
Cable
4.8 Ø
Length 800 mm
Features
Fast Video and Image Recording
Viewing and Saving Images and Videos
Automatic White Balance
Wi-Fi Printer
Print your fault codes and the corresponding descriptions as well as actual values, coding information and much more. In practical pocket format, it makes printing easy and blazingly fast. Can be combined with the EURO TAB II and EURO PRO 4 diagnostic devices.
Technical Data
Wi-Fi
Battery
Lithium Ion
Dimensions
124,5 x 79,3 x 35,3 mm
Features
Print Error Codes and more
Ergonomic, Light and Handy
Automatic Paper Feed
BST-360 Battery Tester
The LAUNCH BST-360 is a Bluetooth Battery Tester suitable for both technicians and end users. It has an advanced conductance test function that measures the exact cold start current capacity of the vehicle battery to provide meaningful results. It also provides a battery condition indicator and an overall indicator for the vehicle’s starting and charging system. The LAUNCH BST-360 enables the user to detect problems in the charging system accurately and in time. Adding to its compact, lightweight, portable design and practical usability is the Bluetooth wireless technology that synchronises with LAUNCH X-431 diagnostic products. It provides battery condition monitoring capability to identify batteries that are not performing optimally within specifications.
Technical Data
Bluetooth
Voltage
12V
Battery
30 AH - 80 AH
Working Temperature
- 10 - 50 °C
Storage Temperature
-20 - 60°
Cable Length
56 cm
Features
Compact Size
Multi Terminal Support
X-431 EURO TAB II
X-431 EURO PRO 5
X-431 EURO PRO 4
X-431 EURO TURBO
Automatic Bluetooth
BAttery Types Regular Lead-Acid, AGM, GEL
Print Report
Tests during each battery status
Multilingual
Tests during each battery status
Functions
Electric Current Test
Voltage Test
Ripple Detection
Starter Test
Charging System Test
Battery Test
I AM INTERESTED
Contact our distribution partners for further details or a quotation