Wide vehicle model coverage with over 100 models
Including Software Updates
Supports PassThru
Supports Remote Diagnosis
The X-431 EURO TAB III, based on Android 9 system, is the latest addition to our X-431 Series and the newest high-end vehicle diagnostic device that has been developed by LAUNCH.
It passes all technology and diagnostic advantages from the previous X-431 EURO TAB II model, such as wide car model coverage, powerful test function, abundant special functions, accurate test data and more. The new high-end diagnostic device is integrated with a “Guided Diagnosis” function, known as LAUNCH Electronic Database, powered by HaynesPro, to support your technicians in their daily work.
It comes with SmartLink C as an equipped standard VCI, supported with LAUNCH Super Remote Diagnosis System (SRDS), DoIP, PassThru and the possibility to extend the device with a HD Truck Software, which can be purchased separately.
The scope of delivery includes the new LAUNCH O2-1 ScopeBox to handle the sensor testing, a 13.3 inch HD display sunlight readable screen, a new designed APK Interface for more practical functions and all necessary cables and accessories.
Operating System
Android 9.0
Processor
2.0 GHz / 8 Core
Display
13.3″
1.920 x 1.080 mm
RAM
8 GB
Memory
256 GB
Micro SD Card
up to 128 GB
WiFi
2,4 GHz / 5 GHz
USB
Bluetooth
Battery
9.360 mAh
7.6 V / 71.1 Wh
Dimensions
353 x 236 x 71 mm
Electric Parking Brake
Oil Change Service
Steering Angle Sensor Calibration
Battery Retraining
Brake Bleeding System
Diesel Particle Filter
Injector Coding
Retraining Throttle Valve
Tyre Pressure Monitoring System
Crankshaft Position Sensor
Immobiliser
Adaptive Driving Light
Window Regulator Reset
Sunroof
Chassis Calibration
Exhaust Gas Recirculation
Fuel Mixture Adaption
AdBlue Reset
Coolant Venting
Nitrogen Oxid Sensor Reset
Drivers Seat Memory
Start-Stop Reset
Transport Mode
Tyre Diameter Reset
Transmission Adaptive Value Reset
Menu Language
Gas Particulate Filter Regeneration
Intelligent Cruise Control System
A/C System Relearn
Motor Angle Calibration
Engine Power Balance Monitoring
High Voltage Battery Diagnostic
Immo PROG
ECU Reset
FRM Matching
Rain Light Sensor
Clutch Matching
Turbo Matching
Gateway Module Data Calibration
Supports Passenger and Commercial Vehicles
Remote Diagnosis
Compatible with DoIP
PassThru J2534, D-PDU, RP-1210
Local Diagnosis
Almost every modern car is operated via an electronic control module. Allowing data transfer between each other. This can lead to software issues and requires reprogramming of the vehicle control modules through the OBDII port. The regulation provides for the possibility of reprogramming all the vehicle ECUs with PassThru technology.
The standardisation gives workshops the possibility of having just one VCI Box to communicate to the manufacturers software and server to reprogram all the vehicle ECUs.
Cost-effective access to information and ECU programming downloads directly from the vehicle manufacturer portal when required.
The EU requires vehicle manufacturers to allow free companies to update software on vehicles that meet Euro 5 or higher. The procedure is called PassThru, according to the SAE 2534 and/or ISO 22920 standard.
Vehicle Remote Diagnostic Solution is the ideal tool for identifying and fixing problems that may arise during the lifecycle of certain vehicle components and are too hard or complicated to determine without the support of an expert technician.
Just attach the SmartLink C Box to the vehicle and wait for the X-431 EURO TAB III device to identify the problem.
An expert technician can now access the OBD diagnostic functions remotely with the same level of functionality that a direct physical connection provides.
LAUNCH Remote Diagnostic Solution will save mechanics a lot of working time and increase their efficiency dramatically by letting experts access vehicle data from a greater distance to identify and solve the problem for local mechanics.
Each purchase of a device includes a software update package. After the expiry the user can freely decide if and when the next update should be carried out. This means that the customer can update his diagnostic device to the latest version even after years of use, without any contract and without time limits.
Take advantage of a wide vehicle model coverage in one device without having to take additional expansion measures such as downloads etc. Our comprehensive X-431 EURO TAB III diagnostic device covers more than 100 manufacturers from Europe, Asia and America. Check now whether your model is covered:
The ADAS function (Advanced Driver Assistance System) is an electronic accessory that supports the driver in certain driving situations. The ADAS system does not only increase driving safety but also offers the driver more comfort. More Info
Receive further information or a quote from our distribution partners.
The X-431 EURO TAB III is equipped to diagnose not only commercial vehicles but also heavy goods vehicles. Just simply extend the software via a truck update card which you can purchase through our authorised distribution partners.
The LAUNCH CarSET Electronics package is our basic equipment that supports your technicians to identify, locate and correct faults in electrical systems and components errors using intelligent data applications such as our Vehicle Electronics Smart Assistant (VESA™).
Receive further information or a quote from our distribution partners.
Our Distribution Partners
+49 (0) 2273-9875-0
info@launch-europe.de
Heinrich-Hertz-Str. 10
D-50170 Kerpen
© 2020 All Rights Reserved | LAUNCH Europe GmbH
© 2020 All Rights Reserved | LAUNCH Europe GmbH
© 2020 All Rights Reserved | LAUNCH Europe GmbH
Möchten Sie eine Preisanfrage an einen Vertriebspartner in ihrer Nähe senden? Wir verbinden Sie mit dem richtigen Kontakt.
